With RoboticPaint group, robotic painting machines can be deeply custom constructed and tailored by customer specific requirements to meet with various spray painting conditions. Among our numorous painting solutions, we have a small size painting machine which is shown in above diagram design. It’s widely compatible with lots of objects spraying requirements through an automatic conveyor system.
Advantages of Painting Machine
This small size painting machine is simple robotic operation on touch screen, almost no training required but just few basic logic understanding to get started.
- Central operation
- Easy mechanical structure
- Easy installation and fix
- Durable and flexible
- Programmable for numorous objects spraying
- Less maintenance guarantee!
Painting machine construction details as following:
| Dimensions | L4000*W2500*H2200mm(can be requested) |
| Conveyor type | Stainless steel wire conveyor with speed regulation (can be required if other type needed) |
| Spray booth type | Stainless steel water filtration or dry filtration |
| Sprayer | 1~2 sets 1~6 axis robotic painting machine |
| Weight | 600~800Kg (according to design) |
| Moving accuracy | ±0.1MM |
| Electric voltage | 3Phase 380V ±10 50Hz |
| Waste air exhausion | Centrifugal blower (attach on booth top or outside workshop via air pipe) |
| Spray gun | IWATA WA-101 4~8pcs |
| Moving guide | THK noiseless guide |
| Paint pump | Graco 308 |
How to operate this machine?
Machine inside piping and cabling is preconfiguration before shipment. Once received on client side, we only need to fix the machine at desired position and connect exhaust fan to workshop outside. If we choose water filtration paint booth, we need to fill in clean water and connect outlet water tube. When everything is ready to go, the first thing we need to do is to turn on the socket and make sure electricity supply is good and stable.
Before we turn on painting machine, we need to make water pump and exhaust fan running first so there’s no pollution during paint spraying. Once done, we can start conveyor system and make sure no abnomral noise when moving.
The last step is to start the spray painting machine on touch screen. Each sprayer can load up to 4 spray guns and we can choose to open the specific piece or full run. For single axis sprayer, we only need to set the start and end spraying position with reciprocal moving speed. If it’s multi axis sprayer, we have to adjust each axis motion according to product spraying requirements. Once setup, we can give the program a name then save it in memory. For the next time boot up, we can use it directly without waiting time.
Are you considering a small painting machine with affordable price? Contact us now for a tailored solution!
Interested in this Paint booth?
Call or send us your enquiry now for a tailored solution!
