Eyeglass frame automatic painting machine is advanced setup of our standard five axis painting machine. It’s fully compatible with different glasses frames paint spraying requirements by different programming control. Rod bar can be easily attached on spraying station without touching the product itself, it’s crucial feature for high quality painting. Rod bar can rotate with any angle by setting so we can control the specific area painting. Highest efficiency and minimum labor guaranteed!
Eyeglass Painting Machine Specifications
| Dimensions | L2600 x W2200 x H2220 mm | |
| NO. of support tray | 2PCS | |
| NO. of fixture holders | 6 groups (3 rod bar can be loaded in painting station, 0~360° rotation) | |
| Servo motor | Panasonic /Mitsubishi /Yaskawa | |
| Mechanical motor | CPG | CPG |
| Man machine interface | 7″ Weinview 16 million resolution touch screen | colored |
| Spray gun moving stroke | X: ±1500 mm Y: ±860 mm Z: ±300 mm Spray gun rotationh: 0~180° |
Five axis |
| Spray gun | IWATA, Devilbiss | 2PCS |
| Paint pump | Graco/Prona | 1 |
| Moving guide | THK | |
- Moving guide: THK moving guide with special aluminum guide
- Support structure: 100*100*5T square pipes welding, powder coating finishing.
- Drive: all motions control powered by Panasonic servo motors.
- Control system: Siemens program controller
- Man-machine interface: Weinview 16 milliion high resolution touch screen
After service: All machine is life time tech supported. Our engineers have plenty experience in live production lines and always ready to provide you quick solution 24*7 either for mechanical or electric or software level requirements.
Eyeglass frame spray painting machine applications:
Mechanical feature: Modularized production for each component with minimum tolorance. Surface finishing is extremely high level to deal with various environments. This machine can be widely used for various productions paint spraying requirements, it’s ideal choice for plastic vacuum coating production. It provides all functions from traditional five axis painting machine plus extra functions for vacuum coater rod bar spraying. When painting on rod bar, we can set the rod with any degree rotation or continous rotation. So it’s extremely useful over some complex shaped components spraying. When it’s rotating with rod, spray gun will fully paint on each workpiece at same quality. Operator only need to transfer fixture but not to touch on product for guaranteed quality.
Eyeglass frame painting machine FAQ
Q: What’s the difference with standard 5 axis painting machine?
A: For this eyeglass frame spray painting machine, we have configured with additional structure to work with rod bars. Programming is also more powerful than standard machine. Either hardware or software is re-design. It’s much more powerful to meet with your different painting requirements.
Q: How do I programming to paint different workpiece?
A: All programming is handled through touch pad. It’s movable with a long cable. Operator be able to take it and observe spray gun closely for more accurate adjustament. We offer detailed manual upon machine delivery. You’re also welcomed to test in our factory before shipment.
Q: How do I hold different fixtures?
A: If you do have multiple different fixtures, you can send sample to us. Then we will design suitable holder for each. You can also make your custom holders after received machine.
Q: What kind controller does it provide?
A: Machine controller is powered by PLC programming, operator only need to handle all functions through touch screen pad. The interface is deeply optimized for easy understanding and quick operation.
Q: What else do I need to use this machine?
A: You will need a spray booth to work with this machine.
Q: What’s the required electricity of this machine?
A: 220V /50Hz single phase electricity is required to power on this machine.
Interested in our Painting Machine?
Find more about our painting machine construction details or send us your enquiry now to find out what we can do for you!
