Stainless Steel Filter Spray Booth

stainless steel filter paint booth

Spray booth is a must for paint shop construction. No matter if you are going to spray painting by hand or with a robot, we have to prepare this device. A proper  booth configuration will support our job efficiently and reduce the maintenance work. Stainless steel filter booth is our newly developped product for paint application. It’s not just a simple replacement of the filter material but a different working principle to catch waste paint which is up to 99% ratio efficiency.

Stainless steel filter booth specifications

  • complete stainless steel construction
  • durable and sustainsable design
  • ease of use and maintenance
  • no need replacement
  • very long life cycle

The stainless steel filter booth is complete stainless steel construction including every single nut and fastener. Thus it’s suitable for any type coating application. The paint booth includes the following units: stainless steel support frame, stainless tank, stainless steel filter, stainless steel chamber and air flow tunnel, exhaust blower and air pipes.

How does the stainless steel filter work?

The stainless steel filter is a smart design by stainless steel plate. Above stainless steel tank we make it multiple areas so we can fix multiple filters. Every filter is constructed by multiple machined plates and welded to frame via specific angles. When exhaust blower working, it will produce a special air flow which will pass through the filter. When we do paint spraying, the over sprayed paint will hit on the stainless steel filter directly. When the liquid gravity goes heavy, it will flow down to the tank for recycling. If the paint viscosity is high and hard to flow down, we will need to clean up the filter at a good schedule so it will always at high efficiency.

What’s the difference comparing to other dry filter choice?

For dry filter paint booth construction, there’re various choice for the filter material such as paper, fiber cotton and coconut fiber etc. No matter which material we finally use, it has to be replaced when its too dirty or wet. Because under mass production condition, the filter is a wearing part and has to be replaced every few period.

For our stainless steel filter, it’s an option without replacing requirement. When it’s dirty, we only need to clean it up then fix back. Thus, there’s no extra cost in using this stainless steel filter. For it’s durable design, it’s very strong and no need special care in using it. Comparing to other filter options, it’s a cost saving and more eco friendly choice.