Car Paint Booth Brief Intro

Automatic car paint booth is robotic device with a dry filtration spray booth and painting robots inside. In order to handle proper spraying over different car surface, robot is fixed on movable guide so can be flexible programmed. Paint booth provides a in/out track at the entrance for car transfer purpose. During spraying, the entrance door is closed and functinoal as a fully isolated system. Due to this flexible and scalable configuration, it’s able to handle various automotive paint spraying requirements while maintaing a relatively low cost construction.

As an integration of painting robot and spray booth, we’ll introduce by two categories separately as fofllowing.

Painting Robot Configuration

Model	R2250~2800 (by requirement)
Moving guide	THK heavy load type linear guide
Pressurized air (explosion proof)	0.65MPa, Flow rate：400ℓ/min	clean and dry
Electric capacity	AC200V(3-phase), 2.5kVA
Load capacity	6Kg
Positioning accuracy	±0.5mm
Paint pump	Graco/Timmer
Working environment	Temperature 0±40°, Humidity 20-80%RH, Vibration 4.9m/s2
Safety class	TIIS, ATEX

Paint booth is dedicated design to meet with automotive painting requirements, it’s a small size and tight structure which is full functional as an isolated device. Paint booth technical data goes following:

Dimensions	7000×5500×3300mm(can be tailored by requirement)
Entrance door	3 folding door made by aluminum alloy binding framework(T2.0) Size: 2830*2600mm Strengthen door hinge, door lock bar and durable door handle Aluminum ally and steel panel with uniform powder coating
Booth chamber	Wall plate: T=50mm, 16kg/m3 high density, δ =0.476 EPS thermal insulation board Ceiling plate: Galvanized plate with 40×80 square pipe support Ground: two rows galvanized grill, supported by strong square pillars Anti slide plates are rustless treatment with up to 5000KG load capacity
Illumination	45°lamp case 8 sets×4 pcs=32 pcs, 18W LED energy saving lamp illuminance≧1000lx with up to 30000 hr life time
Ventilation	2 sets centrifugal air supply blower. YDW4.5L 1.4kw.12500m3/h one set centrifugal exhaust blower. YDW5.0A. 5.5kw.15000m³/h High volume, long life time, low noise and electric consumption
Fresh air supply	In booth, it’s configured with CC—G650 hepa filter, be able to filtering≥1μm particles Air supply window is configured with 300 primary filter, be able to filtering≥5μm particles
Electric control	Touch screen panel central control over ventilation, illumination and alerts. Emergency stop configured Overload and leakage protection All cables are heat burning resistant
Waster air filtration	Exhaust window is configured with glass fiber cotton to filter ≥5μm particles 3 layers active carbon absorption for waste paint collection
Electric voltage	380V, 50HZ

Car Paint Booth FAQ

How can I buy this car paint booth?
It’s pretty straight. This booth is a standard setup from our production so we can arrange quickly. Certainly we can also tailor the configuration as per our customer requirement.

How long you need to produce the paint booth?
We need 15-20 days preparation in factory. Depends the type of robot you choose, we might need extra waiting for the robot arrival.

Do I get some training for this booth?
We have detailed installation and operation manual upon machine delivery. We’re also available 24*7 for live help if any support required.

What kind of support do I get?
We offer pre-sale, production and life time after supports. We learn each case separately and offer each customer tailored service. As long as you’re still in business, we provide you life time worry free support.