Six axis painting robot is perfect choice for spray painting work, especially when we’re dealing with lots of different objects with various design. Robot programming can easily handle it in right and efficient way. Robot is also quite friendly for different installation requirement such as grounding, hanging on wall or ceiling etc. No physical change required at all. To meet with different spraying conditions, the robot can be also attached with other components for further flexibility. Following we will see the painting robot integration with a moving guide plus a table for maximum flexibility.
Painting Robot with Moving Table Configuration
| Dimensions | Robot guide up to L20000mm, moving table up to L10000 x W3000 mm | |
| NO. of support tray | 1PCS | |
| Moving guide property | 2 sets THK guides installed on hang support base, painting robot is seamlessly connected by hang installation | |
| Moving table property | Servo drived table with belt transmission, stainless steel structure for easy cleaning | |
| Installation | Robot system is fully configured inside paint room | |
| Man machine interface | 10″ Weinview high resolution touch screen | colored |
| Robot and spray gun reach limit | X: according to moving guide length Y: ±1500 mm Z: ±1500 mm Spray gun rotationh: 0~360° |
Five axis |
| Spray gun | IWATA, Devilbiss | 2PCS |
| Paint pump | Graco pneumatic pump | 1 |
| Work principle | Robot is programmed to trace the object on moving table, moving table can be continuous or step forward moving | |
- Moving guide: THK high precision and high durable guide
- Support structure: 250*100*8T steel pipes welding, powder coating finishing.
- Drive: all motions control powered by Panasonic servo motors.
- Control system: Robot pad plus controller
- Man-machine interface: Weinview high resolution touch screen
After service: robot is life time tech supported. Our engineers have plenty experience in live production lines and always ready to provide you quick solution 24*7 either for mechanical or electric or software level requirements.
Painting robot with moving table application
This painting robot system can be widely used for various paint spraying requirements and especially for big size objects that are hard to work by traditional ways, this moving table can properly and flexibly programmed to fulfill our requirements. It provides all functions from standard robot device plus maximum scalability. Either the painting robot itself or the moving table unit can be separately programmed to work in desired way.
This painting robot can be used for: woodware production, car parts spraying, showerware and machinery components painting etc.
Moving table painting robot FAQ
Q: Is the robot safe to use?
A: Yes it’s 100% safe to use. Our robot is followed by TIIS and ATEX standards production. Although the robot is hanging with moving guide, it’s precision and seamless connection provides guaranteed safety.
Q: How do I programming to paint different workpiece?
A: All programming is handled through touch pad. It’s movable with a long cable. Operator be able to take it and observe spray gun closely for more accurate adjustament. We offer detailed manual upon machine delivery. You’re also welcomed to test in our factory before shipment.
Q: How can I install the robot?
A: This robot is modular device. We have every parts pre-installed, thus only basic connection required for onsite installation.
Q: Do I get some training?
A: Yes, we provide robot operation manual upon delivery. We also provide live video guidance as long as its required.
Q: What’s the required electricity of this robot?
A: 220V /50Hz single phase electricity is required to power on this robot system.
Interested in our Painting robot?
Find more about our painting robot construction details or send us your enquiry now to find out what we can do for you!
